The premier destination for premium products

APC Smart-UPS SRT 10000VA 230V

APC Smart-UPS SRT 10000VA 230V

Others Tsh14,140,000
US Tsh13,460,000

 

  • Easy recovery from overloads; no need to replace a fuse
  • Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Provides temporary battery power when the utility power is out.
  • Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
  • Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
  • Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Install maintenance releases of firmware remotely using FTP.
  • Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.

 

Free delivery on orders over 100,000/-*
7 day faulty item retun policy

Output power capacity:
10.0 KWatts / 10.0 kVA
Max Configurable Power (Watts):
10.0 KWatts / 10.0 kVA
Nominal Output Voltage:
230V
Output Voltage Distortion:
Less than 2%
Output Frequency (sync to mains):
50/60Hz +/- 3 Hz
Other Output Voltages:
220, 240
Load Crest Factor:
3 : 1
Topology:
Double Conversion Online:
Waveform type:
Sine wave
Output Connections:
(6) IEC 320 C13 (Battery Backup)
(4) IEC 320 C19 (Battery Backup)
(1) Hard Wire 3-wire (H N + G) (Battery Backup)
(3) IEC Jumpers (Battery Backup)
Bypass:
Internal Bypass (Automatic and Manual)
Nominal Input Voltage:
230V , 400V 3PH
Input frequency:
40 – 70 Hz (auto sensing)
Input Connections:
Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations:
160 – 275V
Input voltage adjustable range for mains operation:
100 – 275 (half load), 173 – 476 (half load)V
Other Input Voltages:
220, 240, 380, 415
Battery type:
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time:
1.5hour(s)
Replacement Battery:
APCRBC140
Expected Battery Life (years):
3 – 5
RBC Quantity:
2
Extendable Run Time:
1
Battery Volt-Amp-Hour Capacity:
1805
Extended Run Options:
APC-Smart-UPS-SRT-10000VA-230V
Interface Port(s):
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
Control panel:
Multi-function LCD status and control console
Audible Alarm:
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO):
Yes
Available SmartSlot™ Interface Quantity:
1
Surge energy rating:
480Joules
Maximum Height:
432mm , 43.2cm
Maximum Width:
263mm , 26.3cm
Maximum Depth:
715mm , 71.5cm
Net Weight:
111.82kg
Shipping weight:
126.82kg
Shipping Height:
461mm , 46.1cm
Shipping Width:
600mm , 60.0cm
Shipping Depth:
1000mm , 100.0cm
Color:
Black
Operating Environment:
0 – 40 °C
Operating Relative Humidity:
0 – 95 %
Operating Elevation:
0-3000meters
Storage Temperature:
-15 – 45 °C
Storage Relative Humidity:
0 – 95% non-condensing %
Storage Elevation:
0-15000meters
Audible noise at 1 meter from surface of unit:
55.0dBA
Online thermal dissipation:
1947.0BTU/hr
Protection Class:
IP 20
Approvals:
CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (EU), IRAM, RCM, VDE
Standard warranty:
3 years repair or replace (excluding battery) and 2 years for battery
RoHS:
Compliant
REACH:
REACH: Contains No SVHCs
Battery Directive:
Compliant
Battery Notes:
ts_Battery_Notes

Additional information

Weight 126.82 kg
Dimensions 100 × 60 × 46.1 cm

Save More

Keep more of your money.With our efficient online operation our savings become your savings

Free Same Day Delivery

Spend over 100,000/- with us and qualify for free delivery in Dar Es Salaam. Standard delivery is just 5,000/-*

100% Warranty Goods

Unlike other online retailers we chose our suppliers carefully ensuring genuine goods backed by genuine warranties

7 Day Return

Something faulty with your product? No problem. We will arrange for an easy pick up and refund of your order within 7 days*.

Shop with complete peace of mind.

*Only available for products delivered in Dar es Salaam

Reviews

There are no reviews yet.

Be the first to review “APC Smart-UPS SRT 10000VA 230V”

Your email address will not be published. Required fields are marked *

Need Help? Chat, WhatsApp or Call us on 0762 493 434 Leave Feedback

Categories: ,

SKU: SRT10KXLI

Tags: , ,

All search results